Our client is a leading supplier of products and services used by companies worldwide in the design of the electronic content of their products. We are unique in providing solutions for both the hardware components (the chips and boards) and the software components (the embedded operating systems and applications/drivers that control the product's operation). Our strength lies in helping customers design leading-edge products for fast-paced markets (e.g. wireless communications, and internet network servers) with shorter product development cycles and minimal technology risk. In essence, we help our customers build better electronic products, sooner -- improving their profit potential. Established in 1997, it has emerged as a 'Center of Excellence' and is poised for phenomenal growth.
Email your resumes mentioning the job code to : rahul@binaryberries.com
| CODE |
Position |
Job Description |
Education |
Exp. |
Skill set Required |
Remarks |
| EX |
Executive Assistant to MD |
The job involves - The candidate would be responsible for all secretarial responsibilities of the MD. - Handling routine correspondence, scheduling / coordination of meetings, seminar, making appointments, preparing minutes of the meetings, etc. Maintenance of files, Handle Calls Draft Business, Make Travel Arrangements , Handle of Confidential Data with utmost discretion.
Attending phone calls and making other MIS reports.
The candidate would also be required to assist the MD in formation & analysis of reports related to industry, awareness and Operations. |
MBA (Either Full Time / Part Time) |
10+ Years |
Must have
* Good communication Skills.
* Should possed pleasing personality.
|
CANDIDATE SHOULD BE FROM A MNC / REPUTED COMPANY ONLY. |
| DL |
Project Lead - Inventra H/w |
The Job Involves :
* Planning and Executing project deliverables on time to meet exacting standards and requirements of customers.
* Top level design and architecting of product solutions.
* Providing technical leadership while leading a team of engineers.
* Ensuring international industry standards in the product design and development.
|
Bachelors / Masters in Electronics / VLSI / Microelectronics |
8+ Year of Exp |
* Must be a Bachelors / Masters in Electronics / VLSI/ Microelectronics.
* Must have 8+ years total experience in front end ASIC design (using Verilog / VHDL)
* Experience in development of IPs relating to USB 2.0 (Host and device )
* Experience in validation of IP using FPGA at board level
* Exposure to design and development of bus interfaces such as AHB, and PCI
* Exposure to verification languages (such as VERA, SPECMAN) and functional modeling is desirable
* Awareness of industry standards in IP design and working knowledge of Synthesis tools (such as Synopsys Design Compiler is desirable
* Knowledge of datacom protocols would be an added advantage
* Experience in leading a team of engineers is a must.
|
|
| DM |
AMTS/MTS / SMTS |
The Job Involves :
* Validation of EDA tools (MBIST Architect, etc.) designed by Mentor Graphics.
* Creating a test plan and test cases for the tool under validation
* Running tests on the tool as per the test plan and also running regression tests on the tool under validation
* Analyzing defects in the tool and verification of the tool after bugs have been fixed.
|
Bachelors / Masters in Electronics / VLSI / Microelectronics |
2 - 3 Yrs |
* 2-3 years experience in digital design, EDA tool validation and working level knowledge of UNIX.
* Experience of working on Verilog and / or VHDL is desirable
* Experience of working on DFT tools is desirable
* Knowledge of scripts like C-shell script, PERL and AWK will be an advantage
* Experience in the use of simulation / synthesis tools and CVS / ClearQuest will be an advantage.
|
|
| IC |
Senior Developers - C++ |
The job involves : Highly motivated software engineers to work on implementation of bi-directional interfaces between Mentor tools and industry-standard design databases. The engineers will be based in Hyderabad and work closely with the product teams in the US.
|
B.Tech / M.Tech / PhD in CSE / Electrical / Electronics |
4 - 7 yrs |
* Strong programming experience in C++ on any flavous of Unix. *Strong knowledge in Advanced Data Structures and Algorithms. * Exposure / experience in large complex software projects. *Exposure / experience in developing or enhancing large software products preferably in the Physical Verification / Physical Design space of EDA tools. Exposure to working with industry standard design databases is a plus.. *Experince / exposure in EDA industry in companies such as Cadence Design Systems (India), Synopsys (India), Synplicity(India), Magma Design Automation (India), Sequence Design Automation (India), Delsoft (India), Interra Technologies, Atrenta (India), ST Micro Electronics (India), Texas Instruments (India), Intel Technologies (India), Analog Devices (India) will be big big plus. |
preferable IIT candidates and from EDA companies |
| DP |
Project Lead - DFT |
The job involves : * Will be responsible for leading a team of engineers working in Development and Implementation of functionality using VHDL / Verilog. * Will need to understand and execute the product design and lead the development activity. * Development and enhancement of products in the area of Design For Testability. |
B.Tech/M.Tech / PhD in Electronics / Electrical / VLSI / Microelectronics |
6 -10 yrs |
* Must have strong experience in Verilog or VHDL
* Sound knowledge of digital electronics and design is essential. * Experience in Software development in C++ on any of the flavous of Unix is essential. * Strong knowledge of Advanced Data Structures and Algorithms. * Ability to do hands on work as well as to manage the project. |
|
| CI |
AMTS / MTS / SMTS |
Work with the semiconductor industry's leading firms by leveraging your verification and lithographic experience with Mentor Graphics tools. Work closely with our most important customers to address their needs utilizing the Calibre line of design-to-silicon software products and services. Deliver technical presentations, demonstrations and training, provide evaluation and benchmark support, and support initial customer deployment.Establishes close relationship with customers to help facilitate achievement of sales objectives and to provide ongoing services. |
BE / ME - EE |
2 - 8 yrs |
IC physical verification experience, and familiarity with physical verification tools. Ideal candidate will have demonstrated experience in working with Calibre and other Physical Verification tools such as Hercules or Assura. Strong scripting skills in CAD environments, such as Calibre's command language, is required. Working knowledge of UNIX, LINUX, and Windows / NT is required. Candidates should have a strong track record with physical back-end design flow and have excellent problem solving and communication skills. Strong customer interaction skills are a must. |
Position based at Bangalore |
| CP |
PCB Design Engineers - CSD |
The job involves : * Providing Support for Mentor PCB tools to worldwide customers * Resolving the problems/issues faced by customers through various modes of communication |
Dip / B Tech / M Tech in any discipline of Engineering |
2-10 yrs |
* Must have good experience in designing multilayered PCB's. * Must be hands-on in using PCB design tools such as Boardstation, Expedition, Cadstar, Allegro or any other PCB tool. * Must have exposure to High speed designing * Good Written and Oral communication |
Target Companies : Satyam GE, GE India, Honeywell, Tata Honeywell, Tata Elxsi, CDOT. Candidate should be willing to work in shifts and posses good communication. |
| FQA |
PCB Design Engineers - Flow QA |
* Testing of PCB tools required in a design flow and its integration. * Writing and Executing test cases * Analysis, verification and reporting * Opportunity to understand and learn a wide spectrum of PCB Design tools in detail |
Dip / B Tech / M Tech in any discipline of engineering |
3-10 yrs |
* Must have good experience in designing multilayered PCB * Must be hands-on in using PCB design tools such as Boardstation, Expedition, Cadstar or PADS * Must have exposure to High speed designing |
Target Companies : Satyam GE, GE India, Honeywell, Tata Honeywell, Tata Elxsi, CDOT, |
| NE |
CAE |
o Provide support and consulting in systems areas such as installation, licensing, and printing. (This is done from your personal office, primarily through telephone and electronic communications.) o Champion customer needs and provide input as a member of development teams for long-term planning and prioritizing of product improvements. o Document expertise for resolving common problems, in various formats such as technical application notes. o Opportunity for occasional travel to deliver on-site consulting and training.
Join a team of dedicated support professionals who get the satisfaction of restoring customer's productivity on a daily basis. You'll be joining the only EDA support team to win the coveted STAR Award for Complex Support more than once -- (we've won the award five times). We are committed to satisfying our customers and continuously improving everything we do. If you're willing to make the same commitment, we want to hear from you. |
BE / ME |
2 -8 Yrs |
work experience.
o Systems or Network Administrators preferred.
o UNIX (including Linux) and Windows system administration experience necessary.
o Experience with Windows Domains, DNS, NFS, NIS, TCP/IP necessary
o Excellent interpersonal and communications skills required.
o Strong troubleshooting, diagnostic and problem solving skills required.
o Knowledge of Mentor Graphics software environment and customer support experience preferred.
Product Areas to focus on: (Licensing and Installation will be the primary ‘areas' of coverage)
EPD (DxDesigner), PADS , Expedition, VBDC (Veribest Design Creation), HDL flow
|
Willing to work in Shifts. |
| HS |
AMTS/MTS/SMTS |
*Testing of Wire Harness Designing Tools like Lcable and Transdesign tools * Test specifications, Test script generation, Test execution and Test reporting |
B Tech / M Tech in CSE / Electrical / Electronic / Mechanical |
3 - 7 Yrs |
Cases, in creating builds, Regression testing and funtionality testing. * Experience in creating and maintaining Test Scripts/Suits in Unix Environment. * Experience in Unix and Perl scripting is a must. * Experience in either Wire Harness design or ECAD domain is a big plus * Experience configuration management tools like CVS/Clear case is preferred. * Knowledge in C/C++ language preferred. * Knowledge in SQL and Oracle RDBMS * Experience in test automation is a plus. |
|
| HD |
AMTS/MTS/SMTS |
The job involves : * Development and enhancement of world leading Mentor Wire Harness suite of products * Software coding in Java. |
B Tech / M Tech/ PhD in CSE/Electronics / Electrical / Mechnical / Aerospace |
4-6 yrs |
* Strong in one of the following areas ( Graphics, Database programming, XML).
* Good skills in Java, UML & CORBA *Exposure to large complex projects is a big plus * Experience in developing or enhancing software products is a major advantage. *Experience in CAD / CAM / CAE / PDM / PLM relates software companies is a big plus. |
Target Companies : Geometric Software, Parametric Technology Corporation, 3D PLM Software, Dassault Systems. Only IIT candidates will be preferred for this position. |
| JP |
Project Lead - Java |
The job involves:
* Responsibility for leading a team of engineers working in Development and Implementation of business requirements in java-j2ee framework
* Leading the development activity, ability to understand business requirements & translate them into software specifications.
|
B.Tech / M.Tech in Computer Science |
6 - 10 Years |
Must have
* Strong experience in Java , J2EE, EJB
* Ability to do hands on work as well as to manage the project.
|
|
